鼎岳公司生产的医用制氧机分离空气主要由两个填满分子筛的吸附塔组成，在常温条件下，将压缩空气经过过滤，除水干燥等净化处理后进入吸附塔，在吸附塔中空气中的氮气等被分子筛所吸附，而使氧气在气相中得到富集，从出口流出贮存在氧气缓冲罐中，而在另一塔已完成吸附的分子筛被迅速降压，解析出已吸附的成分，两塔交替循环，即可得到纯度为≥90%的廉价的氧气。整个系统的阀门自动切换均由一台电脑自动控制。
英文翻译：
Yue company production of medical oxygen separation from air consists of two filled with molecular sieve adsorption tower, at ambient conditions, the compressed air is filtered, in addition to water drying purification treatment into the adsorption tower, absorption tower in the nitrogen in the air by molecular sieve by adsorption, and the oxygen in the air phase enriched, out of an outlet store in the oxygen buffer tank, while in another tower has been completed the molecular sieve adsorption was rapid decompression, the adsorbed compounds, two towers cycle can be obtained more than90% purity, cheap oxygen. The valves of the system automatically by a computer automatic control.
杭州鼎岳3立方医用制氧机