韩国工程POM Kepital FB2030 产品特性：玻璃珠增强，低翘曲，尺寸稳定，适用于需要低翘曲和凹痕的部件
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
POM FB2030 物性表：
| Specific Gravity | 1.63 | g/cm³ | ASTM D792 |
| Density | 1.64 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Melt Mass-Flow Rate (MFR) | 19 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (2.00 mm) | 1.5 | % | ASTM D955 |
| Molding Shrinkage - Flow | 1.5 | % | |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Strength (Yield, 23°C) | 57.0 | MPa | ASTM D638 |
| Tensile Stress (Break, 23°C) | 58.0 | MPa | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 4.0 | % | ASTM D638 |
| Tensile Strain (Break, 23°C) | 4.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4040 | MPa | ASTM D790 |
| Flexural Modulus (23°C) | 4050 | MPa | ISO 178 |
| Flexural Strength (23°C) | 97.0 | MPa | ISO 178 |
| Flexural Strength (Yield, 23°C) | 96.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | 2.5 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (3.20 mm) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 138 | °C | ASTM D648 |
| Melting Temperature | 165 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohm·cm | ASTM D257 |
| Volume Resistivity | 1.0E+14 | ohm·cm | IEC 60093 |
| Electric Strength | 20 | kV/mm | IEC 60243-1 |
