泰科纳POM Hostaform C9021 产品特性：C 9021，POM/PTFE合金，含2%~5%铁氟龙PTFE粉，PV值高，低摩擦系数，高刚性，高硬度，韧性好，耐化学溶剂，耐燃油，耐强碱，以及良好的耐水解性，高抗热氧化降解，符合FDA规范，用于电器元件，汽车，工程机械配件等应用
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
POM C9021 物性表：
| Physical | Nominal Value | Unit | Test Method |
| Density | 1.41 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (190°C/2.16 kg) | 8.00 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.8 | % | |
| Flow | 2.0 | % | |
| Water Absorption (Saturation, 23°C) | 0.65 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Modulus | 2850 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Yield) | 64.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Yield) | 9.0 | % | ISO 527-2/1A/50 |
| Nominal Tensile Strain at Break | 30 | % | ISO 527-2/1A/50 |
| Tensile Creep Modulus (1 hr) | 2500 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000 hr) | 1300 | MPa | ISO 899-1 |
| Flexural Modulus (23°C) | 2700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 6.0 | kJ/m² | |
| 23°C | 6.5 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 160 | kJ/m² | |
| 23°C, Partial Break | 180 | kJ/m² | |
| Thermal | Nominal Value | Unit | Test Method |
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 104 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 150 | °C | ISO 306/B50 |
| Melting Temperature 2 | 166 | °C | ISO 11357-3 |
| CLTE - Flow | 0.00011 | cm/cm/°C | ISO 11359-2 |
| CLTE - Transverse | 0.00011 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
| Surface Resistivity | 1.0E+14 | ohm | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohm·cm | IEC 60093 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 4.00 | ||
| 1 MHz | 4.00 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 0.0020 | ||
| 1 MHz | 0.0050 | ||
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Electric Strength | 35 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
| Flame Rating - UL | UL 94 | ||
| 1.50 mm | HB | ||
| 3.00 mm | HB |
